WPEDS120-175,WPEDS135-200,WPEDS155-250,WPEKS40-70,WPEKS50-80 gear reducer is a power transmission mechanism that mainly uses the speed converter of gears to slow down the motor speed to the required speed, thereby obtaining a larger torque. Cycloidal reducer and gear reducer are two common types of reducers. What is the difference between these two types of gearboxes, and which one is better? Let's take a look together next.
1、 The characteristics of gear reducers:
1. The gear is made of high-strength low-carbon alloy steel through carburization and quenching. The gears are all equipped with CNC gear grinding technology, which has high accuracy and good contact.
2. High transmission rate. Single stage exceeding 96.5%, double stage exceeding 93%, and triple stage exceeding 90%.
3. Smooth operation and low noise.
4. Long service life and high load-bearing capacity.
5. Easy to disassemble and install.
2、 The characteristics of the cycloidal reducer:
The reduction ratio of 1.1:87 can be achieved through a single stage transmission with a high speed ratio and high efficiency, with an efficiency of over 90%. If multi-stage transmission is used, the reduction ratio will be greater.
2. Compact structure and small volume. Due to the transmission principle, the input and output shafts are on the same shaft, which makes the model as small as possible.
3. Reliable use and long service life. The main components are made of high carbon chromium steel, and some transmission contacts use rolling friction.
4. Smooth operation, low noise, multiple meshing teeth of the cycloidal gear, large overlap coefficient, mechanical parts balance mechanism, limiting vibration and noise to a small value.
The single stage reduction value of a gear reducer is 3, generally not exceeding 10. The commonly used reduction ratio is 3.4.5.6.8.10, and the equipment level generally does not exceed 3 levels. However, compared to customized equipment, this device has the characteristics of high rigidity, high precision (single stage can reach within 1 minute), high transmission efficiency (single stage is 97% to 98%), high torque/volume ratio, and lifelong maintenance free.
Compared with cycloidal reducers, gear reducers have larger force distances, higher costs, lower mechanical strength, larger transmission ratios, and smaller volumes. Users who need gear reducers can consult our company.
