If you find that the WPEKS135-200,WPEKS155-250,WPEDKS40-70,WPEDKS50-80,WPEDKS60-100 gear reducer is severely damaged, you must pay attention, as this is an obvious problem that everyone feels concerned about. If you are not sure how to solve the problem of damage in the presence of this problem, you can look down again.
Gear reducers are generally suitable for motor equipment with low rotational speed and high torque. Generally, several gears with the same basic principle will appear in the motor reducer to achieve ideal deceleration. The ratio of the number of teeth in the size of the gear is the reduction ratio. With the continuous development trend in the field of gearboxes, more and more companies are using gearboxes.
If the strength of the reducer does not meet the regulations, long-term use or mechanical equipment in overloaded natural environments will accelerate the damage of the gear reducer, thereby endangering the normal operation of the braking system. In order to better ensure the normal operation of the equipment and prevent unnecessary damage, we can handle the problem of equipment damage according to the following methods.
Solution to the problem of gear reducer damage:
When the shaft surface and hole shaft of the reducer are damaged, the original density of the parts can be repaired according to the electroplating process.
If the high-speed disperser, paint high-speed disperser, laboratory high-speed disperser, and vacuum pump high-speed disperser are damaged due to gear tooth breakage, it is impossible to repair and reproduce new seasonal parts.
3. Clean the gearbox on time and replace the hardware facilities without adding cleaning agents throughout the operation to ensure the operation of the gearbox.
4. The selection of models should ensure the index of the equipment, strictly follow the actual operation instructions, and fully exert practical effects.
When the gear reducer is damaged during production and manufacturing, it should be treated according to the above methods. If it is difficult to solve, it is necessary to find professional personnel to solve it.
