Precautions when installing WPX self-locking iron shell reducer
Precautions for installing WPX self-locking iron shell reducer: During installation, special attention should be paid to the alignment of the transmission center axis, and the alignment error should not exceed the compensation amount for the use of its coupling. After aligning according to the requirements, more ideal transmission effects and longer service life can be achieved. When installing transmission components on the output shaft, attention should be paid to gentle operation, and rough installation with tools such as hammers is prohibited. Assembly fixtures and internal threads of the end shaft should be used for installation, and the transmission components should be pressed into the WPO147,WPO155,WPO175,WPO200,WPO250 reducer with bolt tightening force to protect their internal parts from damage.
When necessary, protective devices should be installed on the transmission connection components of the WPX self-locking iron shell reducer, such as protrusions on the connection components or the use of gears, sprockets, etc. If the output shaft bears a large radial load, a reinforced type should also be selected. The installation position of the reducer should ensure the operation of the staff, including easy access to positions such as the cursor, ventilation plug, and oil drain plug. After its installation is completed, inspectors should comprehensively check the accuracy of the installation position in order, and determine the reliability of each fastener.
WPX self-locking iron shell reducer
Before running the WPX self-locking iron shell reducer, it is necessary to prepare for operation. Remove the vent plug of the oil tank and replace it with a vent plug. Open the oil level plug screw to check the oil line height. Add lubricating oil beyond the oil level plug screw until the hole overflows. Then, tighten the oil level plug and confirm that it is correct before starting the trial run. When installing the gearbox, there are many key points that we need to pay attention to, and only by paying attention to the above precautions can we better complete its installation work, so that the operation and use process will be smoother.
-
2024-04-12In the modern mechanical industry, the application of reducers is quite extensive, among which the TBW9255L planetary cycloidal pinwheel reducer, as a high...Details +
-
Characteristics and detailed introduction of H3HH8-71-G gearbox
2024-04-12The H3HH8-71-G gearbox is a widely used transmission device in the industrial field, characterized by high precision, high strength, and high efficiency. This...Details + -
ZS165 series cylindrical gear reducer achieves efficient and stable power transmission device
2024-04-11In the modern industrial field, a WPWV175,WPWV200,WPWV250,WPWDV40,WPWDV50 reducer is a very important power transmission device used to reduce the output speed ...Details + -
Structural features and advantages of K series spiral bevel gear reducer
2024-04-11WPEDS60-100,WPEDS70-120,WPEDS80-135,WPEDS80-147,WPEDS100-155 Gear reducer is a widely used mechanical equipment in the industrial field, among which the K...Details +