WP reducer, also known as WP reducer, is divided into standard WPS series, standard WPD series, standard WPA, and WPO WPDA WPDO, WPDS, WPDS, etc. WP worm gear reducer is developed on the basis of WD reducer. The worm gear is made of 45 # high-quality steel through heat treatment and manufacturing, and the WPDX175,WPDX200,WPDX250,WPDZ50,WPDZ60 worm gear is cast with tin bronze. It has good wear resistance, especially in terms of bearing capacity. The worm gear reducer is mainly suitable for reducing the transmission of various mechanical equipment such as plastics, metallurgy, beverages, mines, lifting transportation, chemical construction, etc.
Introduction to the advantages of WP gearbox:
1. Smooth transmission, low vibration, impact, and noise, high reduction ratio, wide versatility, and can be used in conjunction with various mechanical equipment.
2. It can achieve a larger transmission ratio through single-stage transmission, with a compact structure. Most models of reducers have good self-locking, and can save braking devices for mechanical equipment with braking requirements
3. The meshing friction loss between the worm screw teeth and the worm gear tooth surface is relatively large, so the transmission efficiency is lower than that of gears, which is prone to heating and higher temperature.
4. Higher requirements for lubrication and cooling.
5. Good compatibility, the worm gear and worm gear are manufactured according to national standards, and standard parts are used for bearings, oil seals, etc.
6. There are two types of box body types: basic type (the box body is a vertical or horizontal structure with a bottom board) and universal type (the box body is a rectangular body with fixed screw holes on multiple sides, without a bottom board or with a separate bottom board)
7. There are two types of input shaft connection methods: basic type (single input shaft and double input shaft) and with motor flange.
8. The position direction of the output and input shafts includes the input shaft at the bottom and top; Output axis up and down; Input axis up and down.
9. Two or three reducers can be used to form a multi-stage reducer to achieve a maximum transmission ratio.
WPEA iron shell worm gear reducers can be seen in almost all types of mechanical transmission systems, from ships, cars, locomotives in transportation, heavy-duty machinery for construction, processing and automated production equipment used in the mechanical industry, to common household appliances, wall clocks, and so on in daily life. Its use can be seen in the transmission of large power, small loads, and precise viewpoint transmission. In industrial use, reducers have functions of deceleration and torque addition. Therefore, it is widely used in speed and torque conversion equipment.
