Both reduction motors and ordinary motors have the word "motor", so what is the difference between these two products? If you don’t understand these two concepts, take a look at the editor’s answer. We hope the knowledge we share can help you.  Reducer motors are usually integrated and assembled by professional reducer manufacturers and then supplied in complete sets. Reduced motors are widely used in the steel industry, machinery industry, etc. The advantages of using a reduction motor are simplified design and space saving. Reduced motors are called gear motors. They are modularly combined. At the same time, the output torque becomes larger, 6-pole (output synchronous speed 1000rpm), 8-pole (output synchronous speed 750rpm), so it uses a gear mechanism or other mechanism (such as a cycloid) Reduce the speed of the motor, but the output speed or torque of the motor cannot meet the actual requirements. Among them, 4-pole motors are the most commonly used.
Since the speed used by the equipment is generally relatively small, the higher the number of poles of the motor, the more expensive it will be. , the common motor is 4-pole (output synchronous speed 1500rpm), which is a combination of reduction gearbox and motor. In ordinary electric motors, the motor is represented by the letter M in the circuit (the old standard is D). Its main function is to generate driving torque and serves as the power source for electrical appliances or various machinery.
The generator is represented by the letter G in the circuit. , its main function is to convert mechanical energy into electrical energy. The reducer plays the role of matching the speed and transmitting torque between the prime mover and the working machine or actuator. The reducer is a relatively precise machine. The purpose of using it is to reduce the speed and increase the torque. Reducer is a type of transmission, generally used for low-speed and high-torque transmission equipment. The principle is to transfer the power of an electric motor, internal combustion engine, motor or other high-speed operation through the gear with a small number of teeth on the input shaft of the reducer to mesh with the gears on the output shaft. The large gear can achieve the purpose of deceleration; the ratio of the number of teeth of the large and small gears is the transmission ratio.
WPWDKA100,WPWDKA120,WPWDKA135,WPWDKA155,WPWDKA175 The reducer is an independent component composed of gear transmission, worm transmission, and gear-worm transmission enclosed in a rigid shell. It is often used as a reduction transmission device between the original moving parts and the working machine. It plays the role of matching speed and transmitting torque between the prime mover and the working machine or actuator, and is widely used in modern machinery. Reducers can be divided into single-stage and multi-stage reducers according to the number of transmission stages. The wheel shape can be divided into cylindrical gear reducers, bevel gear reducers and conical-cylindrical gear reducers; according to the transmission layout, it can be divided into It is an expansion type, split type and co-axial reducer.
