The reducer is one of the main equipment of the enterprise. Once the fit clearance occurs in the operation process, it will cause serious damage to the transmission shaft and transmission gear, causing major shutdown accidents, and the enterprise will suffer huge economic losses. Once the bearing housing of the reducer is worn, the replacement cost of the parts is high and the manufacturing cycle is long. The general repair method is to machine or expand the hole and insert the steel sleeve after disassembly and repair welding, which is time-consuming and costly. In western countries, polymer composite materials are often used to solve the wear problem of gear reducer bearing housing, which has mechanical properties and good plasticity, greatly reducing the repair time of equipment under the condition of ensuring the normal operation of equipment, and creating huge economic value for enterprises.
The cycloidal pinwheel reducer has six characteristics:
1. Large transmission ratio
The cycloidal pinwheel reducer has a higher speed ratio, and the transmission ratio is 1:7 to 1:87 when the first reduction is made; The rotation ratio of two-stage deceleration is 1:121~7569, and there is a higher three-stage deceleration. Customers can also choose this type according to their own conditions.
2. High transmission efficiency
The cycloidal pinwheel reducer adopts rolling meshing at the meshing part of the tooth surface, and there is no relative sliding on the gnawing surface. The general efficiency can be more than 90%.
3. Convenient maintenance
#The models below 6125 use high grade grease without food protection.
4. Small size and light weight
The cycloid pinwheel reducer adopts the principle of planetary transmission. The input shaft and output shaft are on the same axis, and it has the unique feature of being directly connected with the motor, making its model as small as possible. Therefore, cycloid pinwheel reducer has the characteristics of small size, compact structure and light weight. Compared with the ordinary two-stage cylindrical gear reducer, the volume can be reduced by more than 2/3; The weight is reduced by more than 1/3.
Cycloidal pin wheel reducer
5. Easy to disassemble and repair
Due to the reasonable structure design of the cycloidal pinwheel reducer, simple disassembly and assembly is convenient for maintenance, the number of parts used is small, and the lubrication is also very simple.
6. Long service life, low noise
Due to the principle of planetary transmission, the number of gnawing teeth of the pendulum needle is large and the coefficient of overlap is large during operation. The overall machine body is in balanced operation. The main parts are made of bearing steel quenched and polished, and the wear is reduced to Z, so the noise generated during operation is low and the service life is long.
WPKA100,WPKA120,WPKA135,WPKA155,WPKA175
