How to use the reducer

The reducer is a relatively precise machine, which is used to reduce speed and increase torque. The reducer is an independent component composed of gear transmission, worm transmission and gear worm transmission enclosed in a rigid housing. It is often used as a reduction transmission device between the prime mover and the working machine. It plays the role of matching speed and transmitting torque between the prime mover and the working machine or the actuating mechanism. It is widely used in modern machinery.

In order to meet the needs of different customers, our reducers are divided into many types, including WP cast iron worm gear reducer, RV aluminum alloy worm gear reducer, two-stage worm gear reducer, worm gear reducer with brake clutch, gear reducer and motor, RV worm gear reducer and motor combination, stepless gear reducer, worm elevator and non-standard reducer.

The working environment of the reducer should be positive or negative 40 ℃. When the ambient temperature is lower than 0 ℃, the lubricating oil must be heated to above 0 ℃ before starting. The reducer should be used according to the model selection regulations, and should not be overloaded. After starting up, observe whether its noise, vibration, sealing, temperature rise and other conditions are normal. If any abnormality is found, stop the machine immediately for inspection, and use it after troubleshooting.

WPEEDO70-120,WPEEDO80-135,WPEEDO80-147,WPEEDO100-155,WPEEDO120-175