For the selection of worm gear reducer, the role of the reducer itself should be considered first, followed by the size of the corresponding equipment, as well as the speed ratio, installation method, assembly form, etc. of the worm gear reducer.
Finally, we should also pay attention to the corresponding motor power and motor use environment. The following is a brief introduction to the selection method of worm gear reducer.
First calculate the speed ratio of the worm gear reducer (reduction ratio=motor speed (standard speed 1400)/speed of the reducer output shaft), try to choose a reduction ratio close to the ideal, and then calculate the torque. Torque calculation is very important for the life of the reducer. Pay attention to whether the maximum torque value of the acceleration exceeds the maximum load torque of the reducer; Finally, determine the direction of the input and output shaft.
Note that the oil level must be checked during use. The sealing plug of the reducer can be replaced with the exhaust plug attached to the reducer through the oil level static hole or by opening the oil plug; The standard working environment temperature of the reducer shall be maintained between - 5C and 40C. The reducer shall not be exposed to sunlight or harsh environment. Attention shall be paid to maintaining good ventilation near the motor fan without affecting heat dissipation.
WPWEDKO60-100,WPWEDKO70-120,WPWEDKO80-135,WPWEDKO100-155,WPWEDKO120-175
