Non standard reducers are generally used in special fields and occupations. The wheelbase between some input shafts and output shafts needs to be increased. Since the output shaft is equipped with a drum, if the wheelbase is not good, it cannot be placed. In this way, the reducer with larger center distance needs to be welded to the box as non-standard.
In some occasions with high ambient temperature and lots of dust, general users do not allow the reducer to add any cooling methods, including shaft fans, water cooling equipment, etc. In this way, they can only increase the reducer box or add fins to the surface for natural cooling, so as to meet the thermal power requirements of the reducer. At this time, non-standard reducers are needed. In addition, customers need special speed ratios, and they don't care about the money, so they can think that they have customized non-standard speed ratios.
Non standard reducer:
The non-standard reducer is a reducer manufactured/produced according to the parameters provided by the user and is different from the conventional/existing/standard type reducer.Generally, non-standard reducers are made of steel plate by welding, and the style can be planned and manufactured according to customer requirements.
Model selection of non-standard reducer:
Non standard reducers are reducers produced according to the parameters provided by customers. They are generally used for transmission equipment with low speed and large torque. Before producing non-standard reducers, customers must understand the reducer principle and reducer effect, reduction ratio, transmission ratio, application coefficient, cycloidal pin gear reducer principle, reducer component effect, reducer motor device and other commonly used terms play an important role in the selection and application of non-standard reducers.
There is always a change in the perspective of the reducer in the process of application, which requires the reducer to be equipped with shaft end pump or electric pump for forced lubrication, which is also a non-standard reducer. If the customer needs to detect the oil temperature and bearing temperature, he needs to punch holes on the reducer to add temperature detection units, which is also non-standard.
WPDKZ50,WPDKZ60,WPDKZ70,WPDKZ80,WPDKZ100
