+86-571-56760000
Your current location: HOME > NEWS > Industry dynamic

Which parts of the reducer need to be replaced regularly?

Publish Time: 2022-08-03 Origin: site

Since many parts of the reducer are vulnerable parts, we should check the reducer regularly. Check whether the internal parts are worn. If any, replace them in time to ensure the normal operation of the reducer. Common vulnerable parts mainly include gears, oil seals and bearings. Let's introduce them one by one.


Gear is the core component of reducer. When the reducer works, the gears mesh with the gears to achieve the effect of transmission power. Because the gear is generally made of 20CrMnTi material, the running speed is very high, generally up to 1500 revolutions. Under such high-speed operation, the gear is easy to wear. Therefore, the gear of the reducer should be thoroughly checked at regular intervals, and found and replaced in time.


When the reducer works, it will generate a lot of heat, which will make the temperature inside the reducer rise sharply. The oil seal material is generally made of rubber material, which is easy to deform under high temperature, so that the lubricating oil seeps from the deformed part of the oil seal, which will also affect the use of the reducer. Therefore, we should usually observe the leakage of lubricating oil of the reducer. Once the oil leakage of the reducer is found, replace the oil seal in time, and then add an appropriate amount of lubricating oil to ensure the normal operation of the reducer.


Bearing is also a common wearing part. As the reducer generally operates at high speed, and the bearing also operates at high speed, it is easy to cause bearing damage. Once the reducer is found abnormal, it is usually necessary to observe the operation of the reducer. If there is any damage, the bearing should be checked and replaced in time.


WPDO120,WPDO135,WPDO147,WPDO155,WPDO175

Latest News