Your current location: HOME > NEWS > Industry dynamic

Precautions for wpwx155 worm gear reducer

Publish Time: 2022-06-28 Origin: site

Introduction to wpwx155 worm gear reducer:

The reducer is an independent closed transmission device between the prime mover and the working machine. It is used to reduce the speed and increase the torque to meet the work needs. It is also used to increase the speed in some occasions. It is called the speed increaser. When selecting the reducer, the external sequence size, transmission efficiency, bearing capacity, quality, price, etc. of different types and varieties of reducers shall be compared according to the selection conditions of the working machine, technical parameters, performance of the power machine, economy and other factors, so as to select the appropriate reducer. The reducer is a kind of relatively dense machinery. The purpose of using it is to reduce the speed and increase the torque.

Precautions for wpwx155 worm gear reducer:

1. Wpwx155 worm gear reducer shall not be hammered by gravity to avoid damage; Regularly check whether the installation foundation, seal and transmission shaft are in alignment Often. In case of normal use, the high temperature of lubricating oil shall be less than 85 ℃. In case of abnormal oil temperature rise and abnormal noise, it is necessary to Stop the machine immediately for inspection, and continue to use it after troubleshooting.

2. replace the lubricating oil after the first use or new replacement of the worm gear pair and 150-400 hours of operation. During the subsequent oil change, the cycle of the worm gear reducer shall be less than or equal to 4000 hours. The oil filling amount shall be in accordance with the requirements of the table. It is forbidden to mix oils of different brands. Oils of the same brand but different viscosities are allowed to be mixed.

3. regularly check the quantity and quality of oil, keep enough lubricating oil, and timely replace the oil mixed with impurities or deteriorated. Operating ambient temperature of reducer Is -40 ~ +40 ℃. When the ambient temperature is lower than 0 ℃, the lubricating oil must be heated to above 0 ℃ before startup or the lubricating oil with low freezing point shall be used.


Latest News