Precautions for installing WPX self-locking iron shell reducer: During installation, special attention should be paid to the alignment of the transmission center axis, and the alignment error should not exceed the compensation amount for the use of its coupling. After aligning according to the requirements, more ideal transmission effects and longer service life can be achieved. When installing transmission components on the output shaft, attention should be paid to gentle operation, and rough installation with tools such as hammers is prohibited. Assembly fixtures and internal threads of the ...

WP reducer, also known as WP reducer, is divided into standard WPS series, standard WPD series, standard WPA, and WPO WPDA WPDO, WPDS, WPDS, etc. WP worm gear reducer is developed on the basis of WD reducer. The worm gear is made of 45 # high-quality steel through heat treatment and manufacturing, and the WPDX175,WPDX200,WPDX250,WPDZ50,WPDZ60 worm gear is cast with tin bronze. It has good wear resistance, especially in terms of bearing capacity. The worm gear reducer is mainly suitable for reducing the transmission of various mechanical equipment such as plastics, metallurgy, beverages, mines,...

The interior of the WPEDKS155-250,WPEX40-70,WPEX50-80,WPEX60-100,WPEX70-120 planetary reducer includes a planetary carrier, planetary gears, sun gear, inner ring gear, and other components. The planetary carrier of the planetary reducer has two types: double support and single support. So, what are the differences between dual support and single support planetary reducers?1. Differences in structureThe planetary carrier of the double supported planetary reducer is hollowed out by CNC, and then a pin hole is drilled on the upper machining center. It is also necessary to ensure that the pin...

1. The WPEX155-250,WPEDX40-70,WPEDX50-80,WPEDX60-100,WPEDX70-120 worm gear of this machine can run in both forward and reverse directions, but it must not run in reverse or clockwise. When the ambient temperature is below 0 ℃, the lubricating oil must be heated to above 0 ℃ before starting. When the working environment temperature is above 40 ℃, cooling measures must be taken.2. Lubrication of the gearboxThe lubrication method adopts oil immersion lubrication, so it is necessary to add oil before operation. When adding oil, it should not be higher or lower than the oil level line height....

This article mainly discusses the selection of WPWV80,WPWV100,WPWV120,WPWV135,WPWV155 planetary reducers for the Lisan electromechanical system. It is recommended to choose from the following aspects:Final output torque → output speed → motor power (torque) → flange base (installation requirements) → transmission ratio → transmission efficiency → protection requirements → high and low temperature requirements → cost-effectiveness1. Output torque calculation:Method 1: Output torque T=Motor torque N.m * Transmission ratio i * EfficiencyMethod 2: Output torque T=Reducer torque=9550 x...

Introduction to the R series coaxial helical gear reducer:The R series coaxial helical gear reducer  WPEDA40-70,WPEDA50-80,WPEDA60-100,WPEDA70-120,WPEDA80-135 adopts a modular design and combines international technical requirements, with high technological content. The body is driven by helical gears, and the tooth surface has undergone high-frequency heat treatment and precision grinding, so it can also be called the R series helical gear hard tooth surface reducer. Moreover, the equipped motor has a wide power range and finely graded transmission ratios. Widely used in ceramic machinery,...

The R137 hard tooth surface WPEDS60-100,WPEDS70-120,WPEDS80-135,WPEDS80-147,WPEDS100-155 gear reducer has the following advantages:Adopting high-strength alloy steel and undergoing precise cutting and heat treatment processes, it has high hardness and wear resistance, effectively extending its service life.The reduction ratio can provide multiple choices to meet the needs of different devices. By configuring a reasonable reduction ratio, high torque transmission can be achieved, suitable for various heavy-duty, low-speed, and high-precision transmission scenarios.Featuring high torque and low ...

The transmission mode of the K87 bevel gear reducer WPEDX80-135,WPEDX80-147,WPEDX100-155,WPEDX120-175,WPEDX135-200 has the following characteristics:High transmission efficiency: Using high-quality bevel gears to ensure efficient and stable energy transmission, minimizing energy loss, and providing continuous and strong power to your system.Compact: The output mode design of the K87 reducer is compact, which can save space and simplify the layout of the overall transmission system.Right angle design: The unique right angle design allows for excellent performance even in limited space...

During the connection between the WPES120-175,WPES135-200,WPES155-250,WPEDS40-70,WPEDS50-80 reducer and the motor, the following points should be noted:Choose the correct coupling: The coupling between the reducer and the motor should be of the appropriate model and size to ensure that it can withstand normal loads and torques, and ensure transmission accuracy and reliability.Adjusting the coupling: Before connecting the reducer and motor, it is necessary to adjust the position and angle of the coupling to ensure that it can correctly transmit power and torque, and can offset the vibration and...

What are the precautions during the installation of the gearbox?Installing the WPEKS135-200,WPEKS155-250,WPEDKS40-70,WPEDKS50-80,WPEDKS60-100 gearbox is a very important process, and correct installation can ensure the performance, lifespan, and operational efficiency of the gearbox. The following are the precautions to be taken when installing a gearbox:Before installation, check whether all components of the reducer are intact and undamaged, especially the transmission and sealing components, to ensure that there are no defects.Before installation, the running direction of the reducer and...

The size of the WPEX80-135,WPEX80-147,WPEX100-155,WPEX120-175,WPEX135-200 motor reducer needs to be determined based on factors such as the volume of the mixing drum, the density of the mixed material, and the mixing speed. Here is a simple calculation method:Calculate the volume of the mixing drum. The volume of a conical mixing drum can be calculated using the following formula: Volume=1/3 x π x (diameter/2) ²  Height. Based on the diameter of 2 meters and the shape of the conical mixing bucket given in the question, the height of the conical mixing bucket can be calculated to be 2 meters, ...

The performance characteristics of the WPWEDK80-135,WPWEDK100-155,WPWEDK120-175,WPWEDK135-200,WPWEDK155-250 worm gear reducer are as follows:High transmission efficiency: The transmission efficiency of worm gear reducers is relatively high, usually reaching over 90%, due to the small friction loss of the worm gear.Large reduction ratio: The worm gear reducer can achieve a large reduction ratio, usually above 1:60, which gives it an advantage in applications that require a large reduction ratio.Compact structure: The structure of the worm gear reducer is compact, occupying small space, and...