As a kind of worm gear wpx50 reducer commonly used in mechanical equipment, worm gear wpx50 reducer is widely used in many fields. This worm gear wpx50 reducer has good characteristics, but it must be paid special attention that temperature does some harm to its operation. The actual situation can be seen as follows:
1. The operating temperature at the limit point of the insulating layer material refers to the temperature of the worm gear wpx50 reducer in the winding insulation layer during operation within the expected life of the reducer in the design scheme. If the operating temperature exceeds the limit point operating temperature of raw materials for a long time, the aging of insulation resistance will be aggravated and the service life will be greatly shortened. Therefore, temperature is one of the primary reasons for the service life of worm gear reducer in operation;
2. The temperature rise is the temperature difference between the reducer and the condition, which is caused by the scalding of the worm gear wpx50 reducer. Temperature rise is a key index value in the design scheme and operation, which means the fever level of the reducer. During the operation of the reducer, if the temperature rise of the reducer suddenly expands, it indicates that the worm gear wpx50 reducer has common faults, or the air duct is blocked or the load is too heavy;
3. The transformer core of the worm gear wpx50 reducer in operation is located in the alternating electromagnetic field, which will form iron loss, copper loss and other stray losses after winding resistance is connected to the power supply. This is to increase the temperature of the transmission gear wpx50 reducer. On the other hand, the transmission gear wpx50 reducer will also discharge heat. When the scalding is the same as the heat removal, the equilibrium state is achieved, and the temperature will not rise but will be stable at the same level. When the scalding is increased or the heat removal is reduced, the equilibrium will be destroyed and the temperature will rise again. If the temperature difference is expanded, the heat removal will be increased and a new equilibrium will be realized at another higher ambient temperature.
This paper introduces the harm of temperature of worm gear wpx50 reducer in operation. We need to understand that if worm gear wpx50 reducer exceeds the scope of temperature, or the temperature rise suddenly expands under low load, it indicates that worm gear wpx50 reducer is not very good and should be checked and repaired immediately.