In the process of using the planetary wpdks175 reducer, we will inevitably encounter some problems more or less. Among all the large and small problems, the failure of wpdks175 reducer to start normally is almost a more common phenomenon. In fact, there is no need to worry about this situation. We can restore it to normal use by doing these three things well.
01: in case that wpdks175 reducer cannot be started normally, first check whether the power supply of AC relay and thermal protection relay is normal. The maintenance method is to check the problems at the power supply and restore the normal power supply.
02: check whether the winding coil of AC relay is damaged or whether the magnet is rusted. The maintenance method is to remove the rust of the magnet during maintenance. If the coil is damaged, it shall be replaced in time.
03: later, check whether the winding of AC relay is short circuited. If there is no open circuit, check whether the wiring contact of thermal protection relay is connected or damaged. The maintenance method is to repair the AC relay so that the contact points receive well.
I think that the reason why wpdks175 reducer can not be started normally without damage is all because of these three points. Therefore, in the case that wpdks175 reducer can not be started normally and ensure that wpdks175 reducer is not damaged, there is no need to spend expensive maintenance fees and assign special personnel to repair. You can carry out maintenance and inspection according to the above three points.
Friends who have just come into contact with planetary wpdks175 reducer generally have little knowledge of wpdks175 reducer, so it is inevitable to wonder what is the difference between primary planetary wpdks175 reducer and secondary planetary wpdks175 reducer, whether primary reducer is more powerful or secondary reducer is more powerful, So today, I will introduce in detail the difference between the primary reducer and the secondary reducer.