Servo planetary wpdks120 reducer is a widely used industrial product. It has great advantages in industry because of its light weight, small volume, large transmission ratio range, high efficiency, stable operation and low noise adaptability. However, oil leakage is inevitable sometimes in the use of servo planetary wpdks120 reducer. None of us want to see oil leakage of servo planet wpdks120 reducer, so what causes oil leakage of servo planet wpdks120 reducer? The following editor will analyze the causes of oil leakage of servo planetary wpdks120 reducer with you as follows:
1. The oil tank pressure of servo planetary wpdks120 reducer rises
In the closed servo planetary wpdks120 reducer, each pair of gears will generate friction and release heat. According to Boyle mallotte's law, with the extension of operation time, the temperature in the planetary deceleration chassis gradually increases, while the volume of the deceleration chassis remains unchanged. Therefore, the pressure in the box increases and the lubricating oil in the box splashes on the inner wall of the deceleration chassis. Due to the strong permeability of oil, under the pressure in the box, where there is no strict seal, the oil will seep from.
2. The structural design of servo planetary wpdks120 reducer is unreasonable, resulting in oil leakage.
If the designed servo planetary wpdks120 reducer has no ventilation hood, the reducer cannot realize pressure sharing, resulting in higher and higher pressure in the box and oil leakage.
3. The servo planetary wpdks120 reducer is not completely clean
When repairing the servo planetary wpdks120 reducer equipment, if the dirt on the joint surface is not completely removed or the sealant is improperly selected, the sealing parts are installed in the opposite direction and the seals cannot be replaced in time, which will also lead to oil leakage.
The above points are the cause analysis of oil leakage of servo planetary wpdks120 reducer.