WP reducer, also known as WP reducer, is divided into standard WPS series, standard WPD series, standard WPA, wpo.wpda.wpdo, wpds, wpds, etc. WP worm gear reducer is developed on the basis of WD reducer. The worm is made of 45#* * * steel through heat treatment, and the worm gear is cast with tin bronze. * * * has good performance, especially in terms of bearing capacity. The worm gear reducer is mainly applicable to the reduction transmission of various mechanical equipment such as plastics, metallurgy, beverage, mining, lifting transportation, chemical construction and so on.
1. Stable transmission, low vibration, impact and noise, large reduction ratio and wide universality. It can be used together with various mechanical equipment.
2. Large transmission ratio can be obtained by single-stage transmission, and the structure is compact. Most models of reducers have good self-locking, and the braking device can be saved for mechanical equipment with braking requirements
3. The meshing friction loss between worm tooth and worm gear tooth surface is large, so the transmission efficiency is lower than that of gear, easy to heat and high temperature.
4. Higher requirements for lubrication and cooling.
5. Good compatibility, worm gears and worms are manufactured according to national standards, and standard parts are used for bearings and oil seals.
6. The box type includes basic type (the box is vertical or horizontal structure with baseboard) and * * * (the box is rectangular, with fixed screw holes on many sides, without baseboard or with baseboard)
7. There are two connection modes of input shaft: basic type (single input shaft and double input shaft) and with motor flange.
8. The position direction of the output and input shaft has the input shaft down and up; Output axial up and down; Input axial up and down.
9. Two or three reducers can be used to form a multi-stage reducer to obtain a great transmission ratio.