1. During installation, please do not exert pressure on the output parts and box body of wpda135 worm gear reducer. During connection, please meet the corresponding requirements of coaxiality and verticality between machinery and wpda135 worm gear reducer.
2. The lubricating oil of wpda135 worm gear reducer shall be changed again after the initial operation to 400 hours, and the subsequent oil change cycle is about 4000 hours.
3. Sufficient lubricating oil shall be reserved in wpda135 worm gear reducer box and checked regularly.
4. Pay attention to keep the appearance of wpda135 worm gear reducer clean, and timely remove dust and dirt to facilitate heat dissipation.
Wpda135 worm gear reducer working condition editing
1. The worm speed of wpda135 worm gear reducer shall not exceed 1500r / min.
2. The working ambient temperature is - 40 ℃ ~ + 40 ℃. When the working ambient temperature is lower than 0 ℃, the lubricating oil must be heated to above 0 ℃ before starting. When the working ambient temperature is higher than 40 ℃, cooling measures must be taken.
3. The input shaft of wpda135 worm gear reducer can rotate forward and backward.