WPW70,WPW80,WPW100,WPW120,WPW135 Cycloidal gear reducer is a common mechanical equipment widely used in various industrial fields. However, with the continuous development and progress of technology, the installation dimensions of cycloidal pinwheel reducers are also constantly changing. This article will provide a detailed introduction to the old installation dimensions of the BWY14-87-3KW cycloidal pinwheel reducer, helping readers better understand and master the installation and usage methods of this mechanical equipment.
1、 Installation dimensions of BWY14-87-3KW cycloidal pinwheel reducer
The BWY14-87-3KW cycloidal pinwheel reducer is a commonly used reducer model, and its outdated installation dimensions are crucial for the correct installation and use of this equipment. Generally speaking, the old installation dimensions of the BWY14-87-3KW cycloidal pinwheel reducer are as follows:
1. Center distance: a=56mm
2. Aperture: d=24mm
3. Number of holes: z=10
4. Transmission ratio: i=31.5
5. Input speed: n1=960r/min
6. Output speed: n2=20r/min
7. Power: P=3KW
These data are the main parameters for the old installation dimensions of the BWY14-87-3KW cycloidal pinwheel reducer, and are crucial for the correct installation and use of this equipment. When installing and using the BWY14-87-3KW cycloidal gear reducer, it is necessary to operate according to these data.
2、 Installation steps for BWY14-87-3KW cycloidal pinwheel reducer
In addition to understanding the outdated installation dimensions of the BWY14-87-3KW cycloidal gear reducer, proper installation and use of this equipment also require following certain steps. The following are the installation steps for the BWY14-87-3KW cycloidal gear reducer:
1. Cleaning the reducer base: Before installing the BWY14-87-3KW cycloidal pinwheel reducer, the surface of the base must be cleaned to ensure a smooth and clean surface without oil stains or other impurities. This is an important step to ensure the normal operation of the gearbox.
2. Place the reducer: Place the BWY14-87-3KW cycloidal pinwheel reducer on the base, ensuring that the reducer is placed smoothly without shaking or tilting.
3. Connect power: According to the power requirements of the BWY14-87-3KW cycloidal pinwheel reducer, connect the power cord to the reducer. Before connecting to the power supply, it is necessary to ensure that the power supply voltage matches the rated voltage of the gearbox to avoid damaging the gearbox.
4. Input shaft connection: Connect the input shaft to the BWY14-87-3KW cycloidal pinwheel reducer. The connection of the input shaft must be firm and reliable to prevent loosening or detachment during operation.
5. Output shaft connection: Connect the output shaft to the BWY14-87-3KW cycloidal pinwheel reducer. The connection of the output shaft must also be firm and reliable to ensure that the gearbox can transmit torque normally.
6. Lubricant addition: Before operation, an appropriate amount of lubricant should be added to the lubrication system of the BWY14-87-3KW cycloidal gear reducer.
