The biggest difference between the design of a general-purpose WPWDX120,WPWDX135,WPWDX155,WPWDX175,WPWDX200 reducer and an ordinary reducer is that the former is suitable for various industries, but the acceleration can only be designed according to specific working conditions.
When choosing a reducer, users need to think differently according to their own requirements. Correction coefficient, the factory should select the motor power (not the extra power of the accelerator) according to the practice; the latter is designed according to the user's general conditions and thinking coefficient, the design has always been considered ordinary, and only needs to meet the operation that is less than or equal to the deceleration that is The extra power and methods that can be used with this unit are definitely complicated.
The additional power of the reducer is usually based on the application (condition) coefficient KA = 1 (the motor or steam turbine is the prime mover, the load of the task machine is bumpy, the daily task is 3~10h, the number of start-up time ≤ 5 times/hour, start-up is allowed Torque is the task. Torque 2 times), the contact strength safety factor SH ≈ 1, the effective probability of a single pair of gears ≈ 1%, and other conditions are determined.
