There are two ways to connect WPWD250,WPWK40,WPWK50,WPWK60,WPWK70 the reducer. One is the method of hugging. That is to say, the output shaft of the servo motor extends into the reducer and is connected by a flange. The reducer has a deformable hoop that securely fixes the shaft of the servo motor by operating the locking screw. The other is connected with an external coupling. Due to the use of an external coupling, a servo motor and a keyway are required. How to properly maintain the reducer; 1. Clean the inside and outside of the equipment, clean the sliding surface, wires, racks, gear boxes, oil holes, etc. No oil stains. The air, cutting edges, debris and dust around the equipment due to oil leakage or leakage of all parts must be cleaned up by a mechanical engineer; 2. Please follow the safety operating regulations safely and do not overload the equipment. The equipment is safe, and Liugong machine protection devices are complete and reliable, eliminating unsafe factors. HB series high-power reducer 3. The lubrication is good, and the oil should be added or replaced in time to keep the oil free of dry friction, the oil pressure is normal, the oil mark is clear, the oil passage is smooth, the oil quality meets the mechanical requirements, the oil gun, oil cup, and linoleum are clean ; 4. Organized tools, accessories and workpieces (products) should be placed neatly, and pipes and lines should be organized; 5. The maintenance of reducers or oil pump gear equipment usually includes daily maintenance. Regular maintenance, regular inspection and precision inspection, equipment lubrication and cooling system maintenance are also important parts of equipment maintenance. The daily maintenance of gaskets is the basic task of equipment maintenance, which needs to be institutionalized and standardized.
