As one of the commonly used deceleration equipment in the factory production workshop, the speed WPWV80,WPWV100,WPWV120,WPWV135,WPWV155 reducer should have control over speed changes to control heating failures caused by speed reduction. Pitting corrosion, a destructive and hidden form of corrosion, inevitably occurs on machines in chemical factories. What should be done if similar pitting occurs in the reducer? The editor teaches you two tips:
Firstly, analyze the corrosion situation based on the material and deal with the occurrence of pitting corrosion in advance. Moreover, the degree of compliance with the selection of meshing materials and the matching of usage loads, as well as the timely handling of heat dissipation, are also among the many reasons for the erosion problem.
Secondly, the correct selection of lubricating oil is also one of the factors that cause pitting corrosion. Generally, lubricating oil is added to the gears of the reducer to reduce the wear of the machine, but it is also necessary to select a reasonable and compliant lubricating oil.
The above solutions can effectively solve the pitting problem of the reducer in a timely manner. Please master them!
