How to prevent the reducer from rusting
As the reducer is mostly made of steel, if you don't pay attention to maintenance during use, the machinery will be easily oxidized and rusted after a long time, which will greatly reduce its service life. Therefore, we can take the following measures to prevent its rusting.
1. The rust of the reducer is mainly caused by the presence of oxygen and water in the lubricating oil. The corrosion is caused by the acid and sulfide in the oil. We can add anti rust additives and preservative additives to the oil to avoid rust.
2. Inject lubricating oil into the friction surface between moving parts to form an oil film to prevent mutual contact between metals, reduce wear, and prevent the rust prevention layer from falling.
3. Keep the reducer surface clean and dry.
4. A layer of metal that is not easy to rust is plated on the surface of the reducer by electroplating, hot plating and other methods to form a dense oxide film, so as to prevent the reducer from rusting due to direct contact with water, air and other substances.
Rust will seriously affect the service life of the reducer and reduce its efficiency. Therefore, it is recommended to take the above rust prevention measures before use to ensure that the reducer can be used for a long time.
WPDKS60,WPDKS70,WPDKS80,WPDKS100,WPDKS120
-
2022-09-08As the reducer is mostly made of steel, if you don't pay attention to maintenance during use, the machinery will be easily oxidized and rusted after a long time...Details +
-
Difference between precision planetary reducer and ordinary gear reducer
2022-09-08Precision planetary gear reducer is composed of planetary gear, sun gear and internal gear ring. It is widely used in various products with high torque and low ...Details + -
Limit operating temperature of direct axis reducer
2022-09-08I believe everyone has heard of temperature rise. Temperature rise refers to the temperature difference with the environment, which is generally caused by...Details + -
Analysis on the cause of shaft breaking caused by the non concentric reducer
2022-08-31Some users have broken the output shaft of the drive motor after several months of operation. After checking the cross section of the output shaft of the drive ...Details +