+86-571-56760000
Your current location: HOME > NEWS > Industry dynamic

Introduction to advantages and disadvantages of WP reducer

Publish Time: 2022-05-31 Origin: site

WP reducer, also known as WP reducer, is divided into standard WPS series, standard WPD series, standard WPA and wpo Wpda Wpdo, wpds, wpds, etc. WP worm gear reducer is developed on the basis of WD reducer. The worm is made of 45# steel through heat treatment, and the worm is cast with tin bronze. It has good performance, especially in terms of bearing capacity. The worm gear reducer is mainly applicable to the deceleration transmission of various mechanical equipment such as plastics, metallurgy, beverages, mines, lifting and transportation, chemical construction, etc.


1. Stable transmission, low vibration, impact and noise, large reduction ratio, wide versatility, and can be used with various mechanical equipment.


2. Large transmission ratio can be obtained by single-stage transmission, and the structure is compact. Most models of reducers have good self-locking performance, and the braking device can be saved for mechanical equipment with braking requirements


3. The meshing friction loss between the worm tooth and the worm gear tooth surface is large, so the transmission efficiency is lower than that of the gear, and it is easy to generate heat and the temperature is higher.


4. Higher requirements for lubrication and cooling.


5. Good compatibility, worm gears and worms are manufactured according to the standards, and standard parts are used for bearings, oil seals, etc.


6. The box type includes basic type (the box is of vertical or horizontal structure with baseboard) and type (the box is of cuboid, with fixed screw holes on multiple sides, without baseboard or with baseboard)


7. There are two types of input shaft connection: basic type (single input shaft and double input shaft) and with motor flange.


8. The position direction of output and input shaft has input shaft at the bottom and at the top; Output axial up and down; Input axial up and down.


9. Two or three reducers can be used to form a multi-stage reducer to obtain a great transmission ratio.


Latest News